AQUASHIELD ANTIMOCROBIAL COATINGS FAQs

LONG LASTING PROTECTION FOR SURFACES SUSEPTABLE TO MICRO-ORGANISM GROWTH

AquaShield Anti Microbial Coatings

AquaShield Anti Microbial FAQs

How does the chemical work?

The active ingredient forms a colorless, odorless, positively charged polymer that chemically bonds to the treated surface. You could think of it as a layer of electrically charged swords. When a microorganism comes in contact with the treated surface, the quaternary amine “sword” punctures the cell membrane and the electrical charge “shocks” the cell. Since nothing is transferred to the now dead cell, the antimicrobial doesn’t lose strength and the “sword” is ready for the next cell to contact it.

Does coating give off gases during or after application?

No. it does not volatilize, dissipate, or leach onto other surfaces. Its chemistry polymerizes where it is applied and forms a permanent bond that essentially lasts the life of the treated surface. Normal cleaning will not remove the treatment, although it can be eventually abraded away.

How long will the treatment last?

Since the cured antimicrobial is non-volatile, insoluble, and non-leaching, in theory the treatment should last for the life of the treated surface. In practice, the life of a treatment depends on a number of factors, not the least of which is the cleanliness of the surface. Abrasive or caustic  cleaners (pH > 11.5) can also shorten effective life.

Can the product be used on porous and non-porous surfaces?

Yes – it can be used on all surfaces, both porous and non-porous. This is a tremendous advantage over disinfectants which by federal law are only approved for hard, non-porous surfaces.

How is the product applied?

The water based product can be applied by trigger sprayer, pump up sprayer, back pack sprayer and fogging.   The manufacturer product by pad, exhaust or over spray.

What is the difference between this product and other antimicrobials out in the marketplace?

Most commercial antimicrobials used are capable of providing a quick inhibition of  bacteria and fungi (although some have a limited spectrum of effectiveness). Conventional products penetrate living cells and kill by way of poisoning the organism. They are designed to act quickly and dissipate quickly to avoid adverse effects to humans and animals due to their toxic ingredients. Our coating takes a totally different approach. Like conventional antimicrobials it provides an effective initial microbial kill when it is applied, BUT, unlike the others, it also provides long-term control of growth on treated surfaces by creating a modified surface to make them antimicrobial.

Is there regrowth after treatment?

Because of its unique chemistry, it provides long-term protection against regrowth and future contamination on treated surfaces. Porous surfaces, which are contaminated below the surface, will occasionally experience some growth that breaks through a treated surface.

What preparation is necessary prior to applying the treatment?

For best results, surfaces should be cleaned or scoured.

Are there any safety concerns after application is complete?

The unique properties  permits near permanent bonding to any surface to which it is applied. Furthermore, this product will not give off any gases, leach onto other surfaces, or loose its strength over time. As long as the surface is kept clean with normal cleaning procedures, the surface will continue to fight any microbial growth.

What types of microorganisms does it work against?

It is effective against odor causing bacteria, mold and mildew.

Does this mean I don’t have to clean my surfaces as much or as carefully?

No. The product provides continuous antimicrobial protection that protects the surfaces. However, normal cleaning practices should be maintained.

Does it begin working immediately?

It begins to work as soon as the microorganism comes into contact with the protected surface. Under right conditions, microbes on an untreated surface can double every 20 minutes!

Has anyone ever gotten sick from using the product?

Extensive testing and a long use history have shown it to be safe. While it is impossible to say that no one will every experience an allergic reaction to anything, it is highly unlikely a negative experience would be observed.

What about PPE? (Personal Protective Equipment)

As with all chemical applications, wearing gloves and protective eyewear are a necessity.  Follow all label directions.

What is the shelf life of the product?

Unopened 2-years, once opened 1-year.

Is it Registered with the EPA?

Yes

Benefits

  • EPA Registered
  • Odorless and colorless
  • Non-toxic
  • Water based
  • Long term prevention of a wide range of microbial growth
  • Protects a wide range of surfaces both porous and non-porous
  • Can be wiped, sprayed or misted on virtually any surface and dries rapidly
  • Non-leaching
  • No off-gasing

USED ON

  • Outwear apparel (sweatshirts, coats, raincoats, overcoats, jerseys, ponchos, jackets, sweaters)
  • Underwear & intimate apparel
  • Hosiery & socks
  • Bed sheets, blankets, bedspreads, curtains & draperies
  • Rugs, throw rugs, toweling, toilet tank covers, floor & door mats, shower curtains
  • Athletic and casual Wear
  • Athletic and casual shoes & shoes insoles
  • Indoor and outdoor awnings including umbrellas
  • Upholstery
  • Vacuum cleaner bags and filters
  • Vinyl paper-wallpaper
  • Mattress pads and ticking
  • Buffer pads (abrasive & polishing)
  • Fire hose fabric
  • Fiberfill
  • Men’s underwear and outwear
  • Carpets
  • Air filters
  • Sand bags, tents, tarpaulins, sails, and ropes
  • Multipurpose disposal wiping cloths
  • Pre-moistened towelettes and tissue wipes
  • Non-woven disposable diapers

ANTI MICROBIAL

AVAILABLE SIZES

  • 250 ML / 8 OZ
  • 500 ML / 16 OZ
  • 1 LITER / 32 OZ
  • 20 LITERS / 5 GALLONS